Maintenance Commands
555-233-143
7-134 Issue 1 May 2002
display firmware download
Whenever the processor resets and the system is restarted, whether initiated by a
technician command or by system software, information about the recovery is
stored. If the reset is escalated, only the reset that successfully completes is
recorded. Information about the reset may also be found in the error log. When a
reset 4 (reload) occurs, the error log is saved on the disk.
Records of the last 16 restarts are retained in the initcauses log in chronological
order. A power failure results in loss of every record in the initcauses log.
To Next Page
Loading...
