Maintenance Commands
555-233-143
7-294 Issue 1 May 2002
status bri-port
status bri-port UUCSSpp [print]
The status bri-port command displays the service state, maintenance state and
layer 1 state of an ISDN-BRI port. Also displayed on this form is information about
the point-to-point signaling links carried over the port. For more information, see
BRI-PORT in Chapter 8, ‘‘Maintenance-Object Repair Procedures’’.
Output
The following display shows a typical result when status bri-port is entered.
Field Descriptions
See Table 7-45 for information on interpreting results of this command.
Port
The location of the ISDN-BRI port.
Service State
Whether the ISDN-BRI port is ‘‘in-service’’ or ‘‘out-of-service.’’
Maintenance
Busy?
Whether maintenance testing is currently being performed on the port.
status bri-port 1c1701 Page 1 of 1
STATUS BRI-PORT
Port: 01C1701
Service State: in-service
Maintenance Busy?: no
Layer 1 State: activated
TEI Value Layer2 State Endpt Extension Endpt SPID Service SPID?
Link1 64 13-established 1010 1010
Link2
Link3
To Next Page
Loading...
