status station
Issue 1 May 2002
7-383555-233-143
status station
This command displays the internal software state information for diagnosis and
to help locate the facilities to which the station is communicating.
Output (from S8700 Multi-Connect)
The following example shows the output for the status station 30001 command.
Table 7-55. status station command parameters
Action/
Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
status
station
extension
print
Station extension (per dial-plan)
Report sent to printer
Examples:
status station 30001
status station 83277
status station 83277 print
init
inads
craft
cust
browse
none none
status station 30001 page 1 of 2
GENERAL STATUS
Administered Type: 6408D+ Service State: No hardware assigned
Connected Type: N/A Download Status: pending
Extension: 30001 SAC Activated? no
Port: X User Cntrl Restr: none
Call Parked? no Group Cntrl Restr: none
Ring Cut Off Act? no CF Destination Ext:
Active Coverage Option: 1
Message Waiting:
Connected Ports:
ACD STATUS
Grp/Mod Grp/Mod Grp/Mod Grp/Mod Grp/Mod
/ / / / / HOSPITALITY STATUS
/ / / / / Awaken at:
/ / / / / User DND: not activated
/ / / / / Group DND: not activated
On ACD Call? no Occupancy: 0.0 Room Status: non-guest room On
To Next Page
Loading...
