ATM-INTF (TN2305/6)
Issue 1 May 2002
8-229555-233-143
ATM-INTF (TN2305/6)
The system recognizes a TN2305/6 as an ATM interface board (ATM-INTF)
unless it has an assigned personality (using the add atm pnc command or add
atm trunk command). ATM-INTF does not have an associated maintenance
strategy, although the:
■ list config and change circuit-pack commands reveal the board
■ test board command can run an on-demand Control Channel test
■ reset board command can reset the board
The following circuit packs are ATM-EI boards if they are administered to provide
ATM port-network connectivity (ATM PNC).
NOTE:
Always replace an ATM-EI circuit pack with the same type.
Error Log Entries and Test-to-Clear Values
MO’s Name
(in Alarm
Log) Alarm Level
Initial Command to
Run Full Name of MO
ATM-INTF WARNING test board UUCSSpp ATM interface board
Table 8-96. ATM-EI circuit packs for ATM PNC
Circuit Pack Fiber Echo Cancellation Release
TN2305 Multimode Yes 7.1
TN2306 Single-mode Yes 7.1
Table 8-97. ATM-INTF Error Log Entries
Error
Type
Aux
Data
Associated
Te s t
Alarm
Level
On/Off
Board Test-to-Clear Value
23 (a) 0 None Warning Off
125 (b) None Minor On
217 (c) 0 None Warning Off
To Next Page
Loading...
