Maintenance Commands
555-233-143
7-446 Issue 1 May 2002
test link
test link link# [short | long] [repeat# | clear] [schedule]
This command verifies that the specified link is administered and performs a
series of tests on the link.
Parameters
Output
The following display shows a typical result when test link 1 long is entered for
an S8700 IP Connect system.
Field Descriptions
Port Each link is identified by a number (1-16) assigned on the Communication-Interface
Links form. Display communication-interface links shows the location and
identification of each link.
Port
The location of the port on an Ethernet circuit pack associated with the link being tested.
test link 1 long
TEST RESULTS
Port Maintenance Name Alt. Name Test No. Result Error Code
08A0617 ETH-PT 1278 ABORT 1000
08A0617 ETH-PT 1281 PASS
08A0617 ETH-PT 1286 PASS
08A0617 ETH-PT 1282 PASS
Command successfully completed
To Next Page
Loading...
