Avaya S8700 - Status Pms-Link

status pms-link
Issue 1 May 2002
7-369555-233-143
status pms-link
status pms-link [print]
The status pms-link command displays the status of the property management
system interface link. If the link is up, whether or not a data base swap is taking
place between the switch and PMS, will be shown. If the link is down, the number
of times the switch has tried to set up the link will be shown.
A property management system (PMS) is a stand alone computer system which
can be integrated with the switch to enhance the service capability for a
hotel/motel.
Output
The following display shows a typical result when status pms-link is entered.
Field Descriptions
Physical
Link State
Up, down, or extension not administered will be displayed. The PMS link is
considered administered only if an extension is given in the system hospitality
form.
Protocol
State
Up, down, or blank if not administered. The state of the CLAN protocol.
Maintenance
Busy
Whether there is any maintenance testing being performed upon the link.
status pms-link
PMS LINK STATUS
Physical Link State: extension not administered
Protocol State:
Maintenance Busy?