Maintenance Commands
555-233-143
7-152 Issue 1 May 2002
enable administered-connection
enable administered-connection [adm-conn# | all
This command re-enables scheduled and periodic testing and in-line error
processing on a specified AC (administered connection) or every AC. It is used
after previously disabling maintenance via the
disable administered-connection
command. These commands can be useful in isolating results of certain
maintenance processes by preventing interference from others.
Parameters
adm-conn#
The number (1-128) of the administered connection as assigned during
administration.
all
This qualifier causes every AC in the system to be enabled.
To Next Page
Loading...
