Avaya S8700 - IPMEDPRO (IP Media Processor Circuit Pack)

IPMEDPRO (IP Media Processor Circuit Pack)
Issue 1 May 2002
8-929555-233-143
IPMEDPRO (IP Media Processor
Circuit Pack)
The TN2302 (IP Media Processor) circuit pack is the next generation VOIP
platform. The TN2302 includes a 10/100 BaseT Ethernet interface to support IP
audio for IP trunks and H.323 endpoints. The TN2302 can perform echo
cancellation, silence suppression, DTMF detection, and conferencing. It supports
the following codecs, fax detection for them, and conversion between them:
■ G.711 (mu-law or a-law, 64 kbps)
■ G.723.1 (6.3-kbps or 5.3-kbps audio)
■ G.729A (8-kbps audio)
The TN2302 circuit board is used to provide voice over IP connectivity. The
TN2302 to acts as a service circuit to terminate generic RTP streams used to
carry packetized audio over an IP network. As part of the overall H.323
implementation, the TN2302 circuit pack handles the audio streams while the
TN799DP C-LAN handles the TCP/IP signaling channels. This MO applies only
to a TN2302.
MO’s Name
(in Alarm
Log)
Alarm
Level
Initial SAT Command to
Run
1
1. UU is the universal cabinet number (1–64 for ATM PNC, 1–44 for CSS PNC). C is the carrier
designation (A, B, C, D, or E). SS is the number of the slot where the circuit pack resides (01–21).
Full Name of MO
IPMEDPRO MAJOR test board UUCSS sh IP Media Processor circuit
pack
IPMEDPRO MINOR test board UUCSS l IP Media Processor circuit
pack
IPMEDPRO WARNING test board UUCSS sh IP Media Processor circuit
pack