Maintenance-Object Repair Procedures
555-233-143
8-928 Issue 1 May 2002
8 0 Internal system error. System received an invalid return code.
9 0 Internal system error
1. Retry the command at 1-minute intervals up to 5 times.
10 0 A test inads-link command is already in progress.
1. Wait 10 minutes for the current command to finish.
2. Review the current command’s results by viewing the Error Log and
selecting the category “inads-link.”
11 0 The switch is trying to report alarms to the alarm receiver. The test cannot be
run at this time.
1. Wait 10 minutes, and retry the command.
Table 8-358. INADS Link Test Error Log Entries — Continued
Error
Code
Tes t
Result Description / Recommendation
Continued on next page
To Next Page
Loading...
