Avaya S8700 - List Fiber-Link

Maintenance Commands
555-233-143
7-170 Issue 1 May 2002
list fiber-link
list fiber-link [print | schedule]
NOTE:
This command is not valid for S8700 IP Connect configurations.
This command displays a list of every fiber link in the system. The list is a
summary of data entered on the fiber link form (
add, display, change, or remove
fiber-link
).
Output
The following display shows a typical result when list fiber is entered on a system
with duplicated PNC and 5 EPNs, one of which is DS1C remoted.
Field Descriptions
FIBER LINK #
The administered number used to identify the fiber link (1 to 27).
TYPE
The types of circuit packs that constitute endpoint 1 and endpoint 2 of the
fiber link (ei or sni).
A-PNC LOC
The physical locations (cabinet-carrier-slot number) of the circuit packs that
constitute the endpoints.
B-PNC LOC
In a system with duplicated PNC, the physical location (cabinet-carrier-slot
number) of the circuit packs that constitute the endpoints of the link in the
B-PNC.
DS1 CONV
Whether or not an endpoint of the link is remotely located by means of a
DS1C Converter complex.
list fiber-link
FIBER LINK ADMINISTRATION
FIBER - - - ENDPOINT 1- - - - -ENDPOINT 1- - DS1
LINK # TYPE A-PNC B-PNC TYPE A-PNC B-PNC CONV
LOC LOC LOC LOC
1 ei 01E01 01D01 sni 01E02 01D02 n
2 ei 02A01 02B02 sni 02E02 02D02 n
3 ei 03A01 03B02 sni 01E20 01D20 n
4 ei 04A01 04B02 sni 02E02 02D20 n
5 ei 05A01 05B02 sni 02E03 02D03 y
6 sni 01E13 01D13 sni 02E13 02D13 n
7 sni 01E09 01D09 sni 02E09 02D09 n
8 sni 01E14 01D14 sni 02E14 02D14 n
9 ei 06A01 06B02 sni 01E03 01D03 n
Command successfully completed