Avaya S8700 - Set Time

set time
Issue 1 May 2002
7-287555-233-143
set time
set time
This command brings up a form showing the current day, date, month, year and
time kept by the system clock. These entries can be edited to update the system
time. The second field is set to zero whenever the time on the clock is altered. If
no new entries are made, system time remains unchanged.
Input Form
NOTE:
When the system clock is upgraded from an earlier release, the daylight
savings time rule on the
set time screen defaults to 0 (no rule). While you
can change the daylight savings time rule, the system clock is not adjusted
automatically until the next transition of the rule.
set time Page 1 of 1
DATE AND TIME
DATE
Day of the Week: Sunday Month: October
Day of the Month: 24 Year: 1999
TIME
Hour: 8 Minute: 16 Second: 31 Type: Standard
Daylight Savings Time Rule: 0
WARNING: Changing the date or time will impact BCMS, CDR and MEASUREMENTS