Maintenance Commands
555-233-143
7-4 Issue 1 May 2002
Modified Commands
Some existing SAT commands have been modified for the new S8700
Multi-Connect and IP Connect configurations and new sample screens are
provided. If a command is valid only for one configuration and not the other, it is
noted in the section describing the command. Note the following changes.
License Commands
The list configuration license command has been replaced by the
serialnumber shell command. Refer to the
Administrator’s Guide for Avaya
MultiVantage Software
.
The remove license command is not available for the S8700 media servers
because you can manually delete license files from the operating system.
reset login-session n
This command was replaced with reset login-ID prior to this release.
To Next Page
Loading...
