Maintenance-Object Repair Procedures
555-233-143
8-1180 Issue 1 May 2002
NO-LIC (No License)
NOTE:
The NO-LIC MO (No License) is a non-traditional MO. As a result, there are
no associated tests or commands that are executed in the traditional
manner.
The NO-LIC MO works in concert with the LIC-ERR MO to look for any
errors/violations associated with the License File. Once a License File error
occurs, MO LIC-ERR logs the error, raises an alarm, and starts a timer that is
associated with the error. When the timers threshold has been exceeded, MO
NO-LIC will cause call processing to be restricted. Every call origination will be
restricted to outgoing emergency numbers. Incoming calls will be restricted to a
Administration (Attendant Console) number.
The license file feature is loaded onto a switch during initialization of the switch
software, restore of translations, and periodically. After initialization, a query is
made to a software module called the license server. This module reads the
license file, compares a serial number in the license file to a serial number in
hardware, compares the software version in the license with the running software
version, and if a match occurs, delivers permission to run to the S8700
Multi-Connect software along with a new feature mask. The feature mask
controls revenue associated options.
For more information, see ‘‘Troubleshooting License File errors’’ on page 8-1016.
MO’s Name (in
Alarm Log) Alarm Level Initial Command to Run Full Name of MO
NO-LIC MAJOR None NO License
To Next Page
Loading...
