Maintenance Commands
555-233-143
7-52 Issue 1 May 2002
busyout trunk
busyout trunk group# [/member#]
The busyout trunk command puts an entire trunk group or a single trunk-group
member in a maintenance busy state whether it is installed or not. Entering only
the group number busies out every member in the group. (Although not
recommended, entering a group number and a slash (/) without a member
number to busyout the member with the lowest-numbered port location.)
Examples
busyout trunk 78
busyout trunk 78/1
For more information, see the following sections: ‘‘Common Input Parameters’’
on page 7-6, ‘‘Common Output Fields’’ on page 7-9, and ‘‘Busyout and Release
Commands’’ on page 7-13.
To Next Page
Loading...
