Avaya S8700 - Enable Test-Number

enable test-number
Issue 1 May 2002
7-155555-233-143
enable test-number
enable test-number test#
Examples
enable test-number 102
This command will re-enable a specified test that was previously turned off with
the
disable test command. (The disable test command is not available to the
craft login.) While disabled a test cannot be run by background or demand
maintenance. Before enabling a test, ascertain why it was disabled, and inform
INADS that it has been turned back on.
Parameters
test# The number of the test to be re-enabled
Descriptions of each test appear under the relevant MO in Chapter 8,
‘‘Maintenance-Object Repair Procedures’’.