Maintenance-Object Repair Procedures
555-233-143
8-144 Issue 1 May 2002
ASAI-BD (Multi-Application Platform
Board)
Maintenance testing of the common circuit pack is handled by on-board firmware
and server-controlled tests. Maintenance software queries the firmware for error
and alarm information, status, and test results. Firmware automatically reports
error conditions that result in server-controlled testing.
For MAPD board insertion, the switch makes an additional board query if any of
the following circuit packs are inserted:
For any of the previous initial board uplinks, the switch queries the board for
administration data as well as reporting the switch software release and the
system type.
MO’s Name (in
Alarm Log)
Alarm
Level
Initial Command to
Run
1
1. Where UU is the universal cabinet number (1–64 for ATM PNC, 1–44 for CSS PNC); C is the
carrier designation (A, B, C, D, or E); SS is the address of the slot in the carrier where the circuit
pack resides (01 to 21); and pp is the 2-digit port number (01, 02, 03, ...).
Full Name of MO
ASAI-BD MINOR test board UUCSS pp ASAI-BD
ASAI-BD WARNING test board UUCSS pp ASAI-BD
Circuit Pack Vintage
TN754 49
TN556 49,
80 or greater
TN800 any
To Next Page
Loading...
