test cdr-link
Issue 1 May 2002
7-421555-233-143
test cdr-link
The test cdr-link command validates that a call detail recording link has been
administered and established. The test defaults to “
short”.
Parameters
For more information, see the following sections: ‘‘Common Input Parameters’’
and ‘‘Common Output Fields’’.
test cdr-link primary | secondary
[short | long] [repeat-number | clear] [schedule]
[primary | secondary] A system may have up to two CDR links: a primary that is normally
used and a secondary that serves as a backup in case the primary fails.
This qualifier specifies which link to test. Primary is the default.
To Next Page
Loading...
