Avaya S8700 - Status Conference

status conference
Issue 1 May 2002
7-307555-233-143
status conference
This command is a troubleshooting aid to help identify problems with a multimedia
conference and can help solve more complex problems.
Synopsis
The first screen appears when status conference is entered and at least 1 valid
conference is found.
Permissions
The following default logins may execute this command: system technician,
inads, init.
Examples
status conference
status conference 2 print
status conference [all | conference-ID] [print | schedule]
status conference [all | conference-ID] [endpoint all | endpoint-id]
(see ‘‘Page 1 - Status Conference Endpoint’’ on page 7-320)
Description
Use the status conference command to solve the following multimedia problems:
1. A user unable to join or remain joined to a conference.
2. A conference having poor video quality due to it being downgraded
because of the automatic algorithms - audio AUTO mode and the Px64
video picture specifications.
3. A user not receiving full service, such as being an audio-only endpoint (no
video).
4. An audio add-on user unable to join or remain joined to a conference.
5. A conferee not being seen by other users due to interworking problems.
6. A user not able to participate in the Muiltpoint Communications Service
conference.
7. A continuous conference not switching endpoints in or out of quadrants.
Defaults
The default for the conference-ID is all (all stored data).