Maintenance Commands
555-233-143
7-320 Issue 1 May 2002
Page 1 - Status Conference Endpoint
Field Descriptions
Endpoint
Endpoint-ID is a slot number associated with the endpoint entered on the
conference forms.
Product
Product identification number obtained from the endpoint.
Manufacturer/
Country
Manufacturer identification number and manufacturer’s country code obtained
from the endpoint.
Terminal Name
This field is always blank.
Sum Grp
Summer group number to which this endpoint belongs and the VC Audio
Level (L1) and Level 2 (L2) summer ports for this group. These fields have an
entry only for conferences with over 6 participants.
Dial Out #1
Dial Out #2
Blank
Blank
status conference endpoint page 1 of 6
STATUS OF CONFERENCE ___ ENDPOINT: __ Status: ________
Ext: _____ Type: ____ Manufacturer/Country: ____/____ Product: _____
Terminal Name: _______________ Data Mode: _________ MLP Rate: ____
Admin Bandwidth: ____ Rate Adaptation: _
Conf Bandwidth: ____ Lo/Hi Interworking: _
Meet-Me Number: ____________________ Dial Out #1: _______________________
Sum Grp: _ L1: ______ L2: ______ #2: _______________________
Quadrature: ______ ________
ENDPOINT STATES/CAPABILITIES/MODES
In Enh ----Capability---- Rate Bond
Use BAS Chl Aud Vid Mlp Gx Adpt Mode Ts Vs
- - - - - - - - - - -
Help line
enter command:
To Next Page
Loading...
