Avaya S8700 - Display Events

display events
Issue 1 May 2002
7-117555-233-143
display events
display events [print]
A vector event is the occurrence of something unexpected during a vector-routed
call due to resource exhaustion or faulty vector programming. (For example,
route-step failures are typically due to the programming of an invalid extension.)
These types of failures are not due to faulty hardware or system software error
and do not constitute incorrect feature operation.
This command allows you to diagnose and correct vectoring problems due to the
above-mentioned causes. See
DEFINITY Enterprise Communications System
Call Vectoring and Expert Agent Selection (EAS) Guide
, for information about
how to interpret this report.
Input Form
The following entry form is displayed to allow limiting the report to events of a
certain type or from a certain time period. Enter the desired parameters and press
ENTER.
The following example shows the input form for display events:
display events Page 1 of 1
EVENT REPORT
The following options control which events will be displayed.
EVENT CATEGORY
Category: denial
REPORT PERIOD
Interval: ___ From: __/__/__:__ To: __/__/__:__
SEARCH OPTIONS
Vector Number: ___
Event Type: _____