Avaya S8700 - Status Cabinet

Maintenance Commands
555-233-143
7-304 Issue 1 May 2002
status cabinet
This command lists the administered cabinets in the system.
Output
The following example shows the output for the status cabinet command if the
value in the
Cabinet Layout field on the Cabinet form is rack-mount-stack.
NOTE:
Since S8700 IP Connect configurations do not use PN maintenance boards,
the
Emergency Select Transfer Switch field would equal NoEqp.
Table 7-46. status cabinet command parameters
Action/ Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
status cabinet init
inads
craft
none none
status cabinet 1
CABINET CONFIGURATION STATUS CABINET CONNECTIVITY STATUS
Carrier PN/SN Carrier Cabinet PN/SN Connectivity Status
Location Number Type Type Active Standby
01A PN 1 rmc-port RMC PN 1 down
01B PN 1 rmc-port
01C PN 1 not-used
01D PN 1 not used
CABINET EMERGENCY TRANSFER CABINET ALARM STATUS
Emergency Select PN/SN Mj Mn Wn
Transfer Switch
PN 1 0 1 19
01B auto-
01A auto-
Command: