busyout sp-link
Issue 1 May 2002
7-51555-233-143
busyout sp-link
busyout sp-link
The busyout sp-link command puts the system printer link into a maintenance
busy state. Placing the system printer link in a busyout state prevents access to
the system printer.
The system printer link is a link from the switch to an external printer. This link is
created by administering the system printer extension and setting up a call to the
system printer.
The following is an example of the results of the
busyout sp-link command:
For more information, see the following sections: ‘‘Common Input Parameters’’
on page 7-6, ‘‘Common Output Fields’’ on page 7-9, and ‘‘Busyout and Release
Commands’’ on page 7-13.
busyout sp-link
COMMAND RESULTS
Port Maintenance Name Alt. Name Result Error Code
SYS-PRNT PASS
To Next Page
Loading...
