Maintenance Commands
555-233-143
7-392 Issue 1 May 2002
Page 5 of the status station 70103 command for an IP call.
This screen shows the IP media processor resources used during this conference
call.
Field Descriptions (Page 5)
Read down the columns on the screen. The first column follows the path of the
switch to make the first two connections on the call; the second column follows the
path of the switch to conference in the third party.
src port
In each column, the src port is the port address of the statused station.
ip-start
The IP address of one end of a direct connection.
ip-end
The IP address of the other end of a direct connection.
audio
Type of audio codec active for the connection. Possible values are: G.711-MU,
G711-A, G.729A, G.723.1-6.3, G.723.1-5.3, PCM, 711-MU, 711-A, 729, 729A,
729B, 729-AB, or 723.1-5.3/6.3.
ss
Indicates whether silence suppression is active on this audio stream. Possible
values are: on or off.
pkt
Size of packet carrying the audio.
dst port
The port address of one of the other parties to which the statused station has a
connection on this call.
status station 70103 Page 5 of 5
CONNECTED PORTS
src port: S00003 src port: S00003
MP HP MP HP
ip-start: 172. 22. 22. 8:2854 172. 22. 22. 8:2854
ip-end: 172. 22. 22.233:2960 01B0905 172. 22. 22.233:2960 01B0905
audio: G.711MU ss:off pkt:20ms G.711MU ss:off pkt:20ms
ip-start: 172. 22. 22.182:2712 01B0103
ip-end: 172. 22. 22.234:2224 02A0107
audio: G.711MU ss:off pkt:20ms
ip-start:
ip-end:
audio:
ip-start:
ip-end:
audio:
dst port: 01B0824 dst port: 02A0723
To Next Page
Loading...
