Avaya S8700 - Page 322

Maintenance Commands
555-233-143
7-66 Issue 1 May 2002
Field Descriptions
Source Board
Location
The C-LAN board location (ppcss) where the firmware image resides.
Firmware Image
File Name
Enter the firmware image file name to download. Firmware image file
names can be from 1 to 40 alphanumeric characters (that is, printable
characters, including blanks).
Target Board
Code
This is the TN-code of the target board to be downloaded.
Suffix
This is the suffix of the target board to be downloaded.
Firmware
Vintage
This is only displayed when a download is in progress or after a download.
Schedule
Download?
This field indicates whether the download will take place immediately or at
some future time. If “n” is entered, the download will commence when the
form is successfully submitted. If y is entered, the Start Date/Time
and
Stop Date/Time fields are displayed to schedule the download.
Remove Image
File After
Successful
Download?
This field indicates whether the firmware image file on the source board will
be automatically removed following the successful download of every
specified target board. If set to y and every board was successfully
downloaded, the image file will be removed, and the file system on the
source board will be disabled.
Start
Date/Time
This field only appears if the Schedule Download field is set to y. The
date portion of the field is formatted: mm/dd/yyyy (mm=2 digits for the
month, dd=2 digits for the day and yyyy = 4 digits for the year). The time
portion of the field is formatted: hh:mm (hh=2 digits for the hour and mm =
2 digits for the minutes).
Stop Date/Time
This field only appears if the Schedule Download field is set to “y”.
The date portion of the field is formatted: mm/dd/yyyy (mm=2 digits for the
month, dd=2 digits for the day and yyyy = 4 digits for the year). The time
portion of the field is formatted: hh:mm (hh=2 digits for the hour and mm =
2 digits for the minutes). If this field is left blank, the download will continue
until completion.
Target
Location
These fields contain the target board locations (ppcss) of the boards that
will receive the download file image.
Firmware
Vintage
This is only displayed when a download is in progress or after a download.
Continued on next page