Avaya S8700 - Page 1567

FIBER-LK (Fiber Link)
Issue 1 May 2002
8-845555-233-143
102 FAIL The SNI circuit pack (Endpoint 1) cannot communicate with the equipped SNI
in slot 2. (The list fiber-link command displays a fiber link’s endpoints.)
1. Perform the ‘‘Fault Isolation for Fiber Links’’ on page 4-19. This should
resolve multiple SNI-PEER errors.
2. If the SNI being tested has SNI-PEER Error Type 1, replace the SNI being
tested. (Replacing an SNI may be service interrupting. Refer to the
SNI-BD section for the procedure to replace an SNI.) To view SNI-PEER
errors, use the display errors command with category PNC-PEER. Retry
the command.
3. If the SNI being tested still has SNI-PEER Error Type 1, replace the SNI in
slot 2.
103 FAIL The SNI circuit pack (Endpoint 1) cannot communicate with the equipped SNI
in slot 3. (The list fiber-link command displays a fiber link’s endpoints.)
1. Perform the ‘‘Fault Isolation for Fiber Links’’ on page 4-19. This should
resolve multiple SNI-PEER errors.
2. If the SNI being tested has SNI-PEER Error Type 257, replace the SNI
being tested. (Replacing an SNI may be service interrupting. Refer to the
SNI-BD section for the procedure to replace an SNI.) To view SNI-PEER
errors, use the display errors command with category PNC-PEER. Retry
the command.
3. If the SNI being tested still has SNI-PEER Error Type 257, replace the SNI
in slot 3.
104 FAIL The SNI circuit pack (Endpoint 1) cannot communicate with the equipped SNI
in slot 4. (The list fiber-link command displays a fiber link’s endpoints.)
1. Perform the ‘‘Fault Isolation for Fiber Links’’ on page 4-19. This should
resolve multiple SNI-PEER errors.
2. If the SNI being tested has SNI-PEER Error Type 513, replace the SNI
being tested. (Replacing an SNI may be service interrupting. Refer to the
SNI-BD section for the procedure to replace an SNI.) To view SNI-PEER
errors, use the display errors command with category PNC-PEER. Retry
the command.
3. If the SNI being tested has SNI-PEER Error Type 513, replace the SNI in
slot 4.
Table 8-328. Test #759 Configuration Audit — Continued
Error
Code
Tes t
Result Description / Recommendation
Continued on next page