Avaya S8700 - Page 1601

FW-DWNLD (Firmware Download)
Issue 1 May 2002
8-879555-233-143
d. Error Type 513—Indicates that the schedule has failed. Failure of the
schedule can result from any of the previously mentioned log only errors
(257 - 259), the schedule timer expiring, or the disable firmware
download command. To resolve the error and clear the alarm, use the
command test firmware download. The Aux Data specifies the reason
why the schedule failed. See the table below for more details.
20 Could not open the requested file – Internal firmware error on target board, retry
download if fail then escalate.
21 Problem reading the requested file – Internal firmware error on target board, retry
download if fail then escalate
22 The download file has a bad CRC – Internal firmware error on target board, retry
download if fail then escalate
24 A download is already in progress – Internal firmware error on target board, retry
download if fail then escalate
30 A start download sequence error – Internal firmware error on target board, retry
download if fail then escalate
32 The file name is too long – Internal firmware error on target board, retry download if fail
then escalate
40 FLASH programming failed on firmware – Internal firmware error on target board, retry
download if fail then escalate
Table 8-334. Error Type 513 Aux Data
Aux
Data Description of Failure
1 Software resources not available; see Error Type 257 (a)
2 Source board related failure; see Error Type 258 (b)
3 A target board failed; see Error Type 259 (c). Check image, translations and retry.
4 Two consecutive target boards failed, download schedule aborted. Verify download
image, translations, and retry.
5 Schedule timer expired, schedule unfinished target boards and retry.
6 disable firmware download command executed
Continued on next page
Table 8-333. Error Type 259 Aux Data
Aux
Data Description of Failure
Continued on next page