H323-BCH (H.323 B Channel)
Issue 1 May 2002
8-889555-233-143
Note:
a. Error Type 18—Indicates that this specific H323 trunk group member has
been craft busied-out.
System Technician Commands
The following commands are available to the system technician:
■ busyout port UUCSSpp – This command on a specific H.323 B channel
drops any active call that may exist on that B channel and effectively
reduces the trunk group’s capacity by one. No physical piece of hardware
is removed from service.
■ release port UUCSSpp – This command on a specific H.323 B channel
effectively increases the trunk group’s capacity by one. No physical piece
of hardware is actually added to service.
■ status trunk grp/mbr – This command is used to find the current status of
the specific B channel. Additional status for an H.323 B channel shows
near- and far-end IP signaling addresses, near- and far-end H.245
addresses, tunneling status, call-reference value for an active call, and the
H.323 conference ID.
■ test port UUCSSpp – This command results in the message No tests
applicable to this object.
To Next Page
Loading...
