Maintenance-Object Repair Procedures
555-233-143
8-1018 Issue 1 May 2002
■ No-License
— System software versions do not match.
— License file is missing or could not be installed.
— Offer Categories do not match.
— A condition that caused the system to enter License-Error mode has
not been corrected/resolved, and the 6-day countdown timer has
expired.
— The switch returns to License-Normal mode when every license
error is cleared.
Login Warning Messages
If the system is in either License-Error or No-License modes, anyone logging onto
the SAT (System Access Terminal) receives a warning message, depending on
the conditions.
■ When “License Error: Golden IPSI Not Responding” (or some other
description) appears, the system is telling you that
— The switch is in License-Error mode.
— The system detected a serial number mismatch between the
License file and the actual hardware in the switch.
■ When “Call Processing Will Be Blocked in Approximately xxx hours”
appears, the system is telling you that
— The switch is in License-Error mode.
— The 6-day countdown timer has started and you have xxx hours
before you enter No-License mode.
■ When “Call Processing Blocked” appears, the system is telling you that
— The switch is in No-License mode.
— The switch allows only incoming and outgoing calls to
pre-administered numbers.
License Modes
Table 8-402 shows the 3 license modes, descriptions, and repair procedures.
To Next Page
Loading...
