EasyManua.ls Logo

Avaya S8700 - Page 2202

Avaya S8700
2618 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Maintenance-Object Repair Procedures
555-233-143
8-1480 Issue 1 May 2002
118 FAIL The SNI circuit pack cannot communicate with the SNI in slot 18 over the
packet path.
1. Fix any on-board SNI-BD errors against this SNI and the SNI in slot 18.
Use the display errors command to find any SNI-BD errors and use the
display alarms command to determine whether the errors have on-board
alarms. Then, follow the associated repair procedures for the SNI-BD as
described in the Maintenance manual.
2. Using the display errors command, check the error log for other SNI
circuit packs with SNI-PEER error type 3329. If other SNI circuit packs
have SNI-PEER error type 3329 errors, replace the SNI in slot 18.
Replacing an SNI may be service interrupting. See ‘‘SNI-BD (SNI Circuit
Pack)’’ on page 8-1429 for the procedure for replacing an SNI.
NOTE:
If other SNI circuit packs do not have SNI-PEER error type 3329 errors,
the problem could be at either of the peer SNI boards. It is arbitrary as to
which SNI is replaced first.
3. Replace the SNI being tested.
4. Replace the SNI in slot 18.
119 FAIL The SNI circuit pack cannot communicate with the SNI in slot 19 over the
packet path.
1. Fix any on-board SNI-BD errors against this SNI and the SNI in slot 19.
Use the display errors command to find any SNI-BD errors and use the
display alarms command to determine whether the errors have on-board
alarms. Then follow the associated repair procedures for the SNI-BD as
described in the Maintenance manual.
2. Using the display errors command, check the error log for other SNI
circuit packs with SNI-PEER error type 3585. If other SNI circuit packs
have SNI-PEER error type 3585 errors, replace the SNI in slot 19.
Replacing an SNI may be service interrupting. See ‘‘SNI-BD (SNI Circuit
Pack)’’ on page 8-1429 for the procedure for replacing an SNI.
NOTE:
If other SNI circuit packs do not have SNI-PEER error type 3585 errors,
the problem could be at either of the peer SNI boards. It is arbitrary as to
which SNI is replaced first.
3. Replace the SNI being tested.
4. Replace the SNI in slot 19.
Table 8-581. TEST #767 Packet Neighbor Link Test Continued
Error
Code
Tes t
Result Description / Recommendation
Continued on next page

Table of Contents

Other manuals for Avaya S8700

Related product manuals