Maintenance-Object Repair Procedures
555-233-143
8-1508 Issue 1 May 2002
Error Log Entries and Test to Clear Values
Note:
a. Error type 600 indicates that an invalid circuit pack was inserted in slot 00,
the SERVICE slot, of a J58890BB port carrier. See the previous list of valid
circuit packs.
The invalid circuit pack’s TN code can be displayed by using the list
configuration board UUCSS command — where UU is the cabinet
number, C is the carrier letter, and SS is the slot number (always 00) of the
alarmed circuit pack.
To retire the alarm, remove the invalid circuit pack.
Table 8-589. Service Slot Error Log Entries
Error
Type
Aux
Data Associated Test
Alarm
Level
On/Off
Board Test to Clear Value
600 (a) None MINOR ON
To Next Page
Loading...
