SYSTEM (System)
Issue 1 May 2002
8-1545555-233-143
Error Log Entries and Test to Clear Values
Notes:
a. Software requested a System Restart Level 2.
b. Software requested a System Restart Level 1.
c. An error occurred during initialization.
d. A reset system interchange or a scheduled server interchange failed.
The AUX Data indicates the cause of the failure. Consult the table in
note p. Enter the Linux server command to determine the current server
status, and resolve any problems on the standby server that are preventing
the server interchange.
e. A reset system interchange health-override command has failed. The
standby server’s state of health (SOH) would not allow a spontaneous
server interchange. Enter the Linux server command to determine the
current server status, and resolve any problems on the standby server that
are preventing the server interchange.
Table 8-600. System Error Log Entries
Error Type Aux Data Associated Test
Alarm
Level
On/Off
Board Test to Clear Value
9 (a) Any None
10 (b) Any None
601 (c) Any None
605 (d) (n) None
606 (e) Any None
607 (f) Any None
6001 (g) Any None
6002 (h) (m) None
6003 (i) (m) None
6101 (j) Any None
6102 (k) (m) None
6103 (l) (m) None
To Next Page
Loading...
