change synchronization
Issue 1 May 2002
7-73555-233-143
Field Descriptions
ATM PNC port networks can only get synchronization from the ATM switch.
Entering a circuit pack location only monitors that pack for errors.
Primary
(Multi-Connect only)
Enter ATM-SW or 5-character board location
Secondary
16-character alpha-numeric characters for identification
Cabinet
The cabinet number applies only for S8700 IP Connect
systems. Valid range is 1-64.
For IP Connect, the list of circuit packs can span two pages.
The maximum number of sync sources available per cabinet is
40 (equivalent to the number of available slots).
To Next Page
Loading...
