Maintenance Commands
555-233-143
7-248 Issue 1 May 2002
Output
The identity of the maintenance object and the result of command execution is
displayed on a screen form similar to the related busyout screen. When the
command aborts or fails, an error code indicating the reason is displayed. See
Common Abort and Fail Codes at the beginning of this chapter.
The following display shows a typical result when
release board 01c07 is
entered.
release board 01C07
COMMAND RESULTS
Port Maintenance Name Alt. Name Result Error Code
01C07 ANL-BD PASS
01C0701 ANL-LINE 5409 PASS
01C0702 ANL-LINE 5416 PASS
01C0703 ANL-LINE 5421 PASS
Command successfully completed
To Next Page
Loading...
