Maintenance Commands
555-233-143
7-314 Issue 1 May 2002
Ts
Indication of the talking state of the endpoint - t, m, M, S, blank.
■ t At the time the command was invoked, voice energy (talking) was
detected from the endpoint.
■ m At the time the command was invoked, the endpoint indicated to the
MCU that it was muted. It is possible that an endpoint may mute, but
not send any indication to the MCU. In this situation the MCU does not
display a mute indication.
■ M At the time the command was invoked, the endpoint’s audio was
muted via UDD/CRCS Agent interface. M displays when both the
endpoint and the UCC/CRCS Agent have muted the endpoint audio.
■ S At the time the command was invoked, the endpoint’s audio was
muted because of solo-audio state set by UCC/CRCS Agent. While in
solo-audio state, new endpoints joining the conference are
automatically muted.
■ blank At the time the command was invoked voice energy (talking)
was not being detected from the endpoint.
To Next Page
Loading...
