status conference
Issue 1 May 2002
7-323555-233-143
Rate Adpt
Rate adaptation/Interworking indicator – 5, 6, y, c, e, n, blank. Values of 5
and 6 apply only to low-/high-speed interworking. Every other value applies
only to rate adaptation.
■ 5 – A 56-kbps (low-speed) endpoint has joined a high-speed (128-kbps or
above) conference. This endpoint is connected with audio-only capability,
but is neither a valid video source nor destination.
■ 6 – A 64-kbps (low-speed) endpoint has joined a high-speed (128-kbps or
above) conference. This endpoint is connected with audio-only capability,
but is neither a valid video source nor destination.
■ y – This endpoint has joined the conference at the administered rate of 64
kbps, but (because rate adaptation to 56 kbps was triggered by another
endpoint) this endpoint has successfully rate adapted to 56 kbps.
■ c – The administered bandwidth of the conference is 64 kbps and this
endpoint has joined the conference at 56 kbps. The first 56-kbps
endpoint that joins 64-kbps rate-adaptable conference triggers rate
adaptation (see
Join Time below).
■ n – A 64-kbps conference was triggered to rate adapt to 56 kbps by some
other endpoint. This endpoint joined the conference at the bandwidth of
64 kbps, but encountered problems in rate adapting down to 56 kbps.
This endpoint may have the audio and may be receiving video, but is not
a valid video source.
■ blank – Rate adaptation was never triggered by any endpoints. So, if
this endpoint is in use and connected, then it joined the conference at the
administered bandwidth.
Bond Mode
BONDing Mode – blank. This field is blank for calls that are not related to
bonding.
To Next Page
Loading...
