Maintenance Commands
555-233-143
7-386 Issue 1 May 2002
Output (from S8700 IP Connect) for
Active IP Phone Conference Call
The following example shows the output for the status station 70100 command.
This command has been enhanced to display the relevant IP audio parameters
used for each IP hop. This data is dependent on the connected ports (page 1 of
the Status Station form).
Page 1 of the status station 70103 command for a 3-way IP conference call.
Field descriptions are the same as ‘‘Field Descriptions (Page 1, status station for
Multi-Connect)’’ on page 7-384.
status station 70103 Page 1 of 5
GENERAL STATUS
Administered Type: 4606 Service State: in-service/off-hook
Connected Type: 4606 Download Status: complete
Extension: 70103 SAC Activated? no
Port: S00003 User Cntrl Restr: none
Call Parked? no Group Cntrl Restr: none
Ring Cut Off Act? no CF Destination Ext:
Active Coverage Option: 1
Message Waiting:
Connected Ports: 01B0824 02A0723
ACD STATUS
Grp/Mod Grp/Mod Grp/Mod Grp/Mod Grp/Mod
/ / / / / HOSPITALITY STATUS
/ / / / / Awaken at:
/ / / / / User DND: not activated
/ / / / / Group DND: not activated
On ACD Call? no Occupancy: 0.0 Room Status: non-guest room
To Next Page
Loading...
