Maintenance Commands
555-233-143
7-398 Issue 1 May 2002
Output (for S8700 Multi-Connect)
For S8700 Multi-Connects, this command provides status for a bearer fault
detection link (BFDL) for the link location specified. The output shows status
about BFDLs, which only exist in port networks with IPSIs.
status sys-link 2a0101 Page 1 of 2
Location: 02A0101 Type/Chan: BFDL Alarms: none
Current Path: present State: up Time Up: 03/12/2002 17:12
Faulted Path: none Last Fault:
Current Hardware Path
Maintenance Maintenance
Location Name Alarms Location Name Alarms
03A PKT-INT none
PN 03 PKT-BUS none
03A01 EXP-INTF none
3 A-PNC FIBER-LK none
01E02 SNI-BD none
01E03 SNI-BD none
2 A-PNC FIBER-LK none
02A01 EXP-INTF none
To Next Page
Loading...
