status trunk
Issue 1 May 2002
7-403555-233-143
This command can generate a snapshot jitter buffer size and packet loss report
for a particular trunk-group member.
In this instance, jitter is the variability in the amount of time (in milliseconds) that
packets are received over the network. When jitter increases, the user
experiences a noisy connection, delays, and a general loss of quality, making
speech unintelligible.
If you issue a status trunk command for a non-IP station or the connection is
hairpinned or shuffled, then the packet loss and jitter size information (page 4)
does not appear. Refer to
Administration for Network Connectivity for Avaya
MultiVantage Software
for more information.
status trunk 11/3 Page 2 of 2
TRUNK STATUS
NETWORK STATUS
Average Jitter (ms) Packet Loss per Second
Last Ten Seconds Last Ten Seconds
0 0 Per Call Info
0 0
0 0 Out of Order Counter: 0
0 0 SSRC Change for Call: 0
0 0 Last Rx Sequence #: 0x1D64
0 0 Last Tx Sequence #: 0x1D1B
0 0
0 0
0 0
0 0
SUMMARY
Worst Case this Call (ms): 0 Worst Case this Call: 0
Average this Call (ms): 0 Average this Call: 0
Current Buffer Size (ms): 30
To Next Page
Loading...
