status tti
Issue 1 May 2002
7-407555-233-143
Output
The following example shows the output for status tti and status psa.
Field Descriptions
TTI Background
Task State
generating TTI ports
removing TTI ports
suspended
not active
completed - all ports translated:
The last background
maintenance task completed normally.
completed - some ports not translated: The last
background maintenance task stopped when resources were
exhausted, and some ports were not translated.
TTI State off means that TTI is not enabled
voice, data shows the type of TTI ports that are being generated
or removed
# of Boards
Completed
Number of TTI-supported circuit packs that were processed by the
background maintenance task.
The ports on a “completed” circuit pack:
■ if unadministered, were translated as TTI ports
■ if administered, the administration was removed
status tti
status psa
TTI/PSA STATUS
TTI Background Task State: completed - all ports translated
TTI State: voice
# of Boards Completed: 30
# of Boards Left to Process: 0
Percent Complete: 100
Elapsed Time since Task Started: 0 :0 :1
NOTE: TTI state must be ‘voice’, TTI task state ‘completed’ and PSA
customer-option enabled, for PSA to operate properly
To Next Page
Loading...
