test alarms
Issue 1 May 2002
7-417555-233-143
Output
The responses, with normal output, will be displayed on a test-by-test basis with
one line of data displayed for each test result. With the failures option only the
tests that have failed will be displayed.
The following output fields are for the ALARM ENTRY section:
The following fields are displayed for the test results:
When errors are encountered preparing a particular object to be tested (not
inserted, contention, etc.) the an error message will be displayed. This error
message will be displayed in the TEST RESULTS data.
Port
The location of the alarmed object (cabinet-carrier-slot-circuit). This is the
same identifier as used by the alarm log.
Maintenance
Name
The logical name of the maintenance object which has been alarmed.
On Board
Whether the fault detected is on the associated circuit pack, or an off board
element connected to the circuit pack.
Alt Name
Terminal extension numbers or trunk-group numbers.
Alarm Type
Major, minor, or warning. This is an indicator to the seriousness of the
alarm raised.
Service State
RDY (ready for service), OUT (out of service), or IN (in service). This is the
current service state of the station and trunk ports shown.
Port
The port address (cabinet-carrier-slot-circuit) of the maintenance object
that is being tested.
Maintenance
Name
The type of maintenance object that is being tested.
Alt. Name
The alternate means of identifying the maintenance object. This field
contains the extension when the object is a station, and it contains xxx/yyy
when the object is a trunk, where xxx is the trunk group number and yyy is
the member number. It contains P/xxx when the object is a private CO line,
where xxx is the private CO line group number.
Test No
The actual test that is being executed.
Result
An indicator as to whether the test failed, passed, aborted or no hardware
was available (no board). If this field has conflict, this means that another
user was testing this hardware. If this field has epn-down it means that the
epn is inaccessible at this time.
Error Code
A numerical description of why the test failed or was aborted.
To Next Page
Loading...
