Troubleshooting a Duplicated Server
Issue 1 May 2002
4-13555-233-143
Auxiliary Data for SYSTEM Errors 6002, 6003,
6102, and 6103
The following table shows which components are indicted by the auxiliary error
codes found by using the preceding flowchart (Figure 4-2 on page 4-12). Once
you have identified the faulted component, consult the section for that
maintenance object (MO).
Testing the Standby Server
The server (system’s SPE) may not have had time to log errors against the failed
component that caused the spontaneous interchange. If you have progressed
through the preceding flowchart without determining the cause of interchange,
test the standby for faults by proceeding through the following steps shown in
Figure 4-3 on page 4-14.
Aux Data Implicated MO
4137 PKT-INT
16389 DUPINT
To Next Page
Loading...
