Avaya S8700 - Page 982

Maintenance-Object Repair Procedures
555-233-143
8-260 Issue 1 May 2002
Primary Signaling Link Hardware Check (#636)
The ATM-SGRP Signaling Group D-channel port depends on the health of the
TN230X interface circuit pack on which it resides. This test fails if there are
problems with either the ATM-DCH (D-channel port) MO or the TN230X circuit
pack. Investigate the ATM TN230X circuit pack (ATM-TRK) anytime there are
problems with the ATM D-channel port (ATM-DCH).
Table 8-107. System Technician-Demanded Tests: ATM-SGRP
Order of Investigation
Short Test
Sequence
Long Test
Sequence D/ND
1
1. D = Destructive, ND = Nondestructive
Primary Signaling Link Hardware check (#636) X X ND
Layer 2 Status test (#647) X X ND
Remote Layer 3 Query test (#1291) X X ND
Continued on next page
Table 8-108. Primary Signaling Link Hardware Check (#636)
Error
Code
Tes t
Result Description / Recommendation
ABORT Internal system error
Retry the command at 1-minute intervals up to 5 times.
8 FAIL There is a problem with the ATM TN230X circuit pack or the ATM signaling
channel (D channel), preventing any ISDN trunk calls until the problem is
resolved.
1. Consult the procedures for the TN230X circuit pack (ATM-TRK) and the
ATM D channel (ATM-DCH).
PASS The basic physical connectivity of the D channel is intact and functional.
1. Try this test repeatedly to ensure the link is up and to uncover any
transitory problems.
Continued on next page