Description of the Software Modules and Parameters
Parameter manual b maXX BM3000
Document no.: 5.12001.07
235
of 820
4
125.20 Offset Channel 1
Offset correction for Channel 1
125.21 Offset Channel 2
Offset correction for Channel 2
125.22 Test signal
If this parameter is entered as Source ID in Parameter Z125.1– or Z125.2–, a sine wave
test signal can be generated for the output. The amplitude is defined by Parameter
Z125.17–. The cycle time is equal to the 1000-fold of the set output cycle time of param-
eter Z125.7–.
To Next Page
Loading...