Baumuller b maXX BM3000 - Page 420

Set Value Generators
Parameter manual b maXX BM3000
Document no.: 5.12001.07 Baumüller Nürnberg GmbH
420
of 820
4.6
132.13 Duration zone 2
Duration of Time Zone 2 for the set value generator in ms. The associated set value is
applied to the output of the generator for this duration.
132.14 Set value 3
Set Value in Time Zone 3 of the set value generator.
When the set value generator is started, a check is made to make sure that the set value
lies within the range of values in the target parameter and if necessary an error message
is issued.
132.15 Duration zone 3
Duration of Time Zone 3 for the set value generator in ms. The associated set value is
applied to the output of the generator for this duration.
132.16 Set value 4
Set Value in Time Zone 4 of the set value generator.
When the set value generator is started, a check is made to make sure that the set value
lies within the range of values in the target parameter and if necessary an error message
is issued.
132.17 Duration zone 4
Duration of Time Zone 4 for the set value generator in ms. The associated set value is
applied to the output of the generator for this duration.