Belanger FreeStyler - Page 237

INSTALLATION AND STARTUP
1MANUL220 Belanger, Inc.® * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681 15-11
Chapter 15 Wheel Cleaning and CTA Options
On-Board Wheel Cleaner Specifications
Specifications
Pump type:
Multi-Stage Centrifugal Pump
Motor type:
10 Hp, 3-Phase 208-230/460 V
Tank capacity:
30 Gallon
Maximum flow:
40 GPM
Maximum pressure:
260 PSI
Inlet size:
Min. 30 GPM, 3/4” Barb Hose Fitting
Outlet size:
1-1/4” Barb Hose Fitting
Timer Settings:
12-Off Delay
3 sec Range
3 sec Delay
Utilities
Electrical requirements:
10.0 Hp 3-phase
208 @ 32 Amps – 230 @ 31.5 Amps
VAC 120 @ 2 Amps constant from GFCI protected circuit
side
Specified Output 120V signaled
Water Requirements:
1” @ 30 GPM @ 40 PSI
Direction of Flow Schematics
See Nozzle Chart at the end of this chapter for more details.
Check Valve
3/4” Hydraulic Hose
1-1/4” Hydraulic Hose
1-1/4” Hydraulic Hose
Motor and Pump
Gauge
Tank
Check Valve