Bosch Rexroth ActiveMover - Page 163

Maintenance and repair 163/188
3 842 564 874/2021-04, MIT: ActiveMover, Bosch Rexroth AG
Fig. 121:
8
9
11
12
A
B
A
C
E
D
F
557 186-110
Aligning the fi xing element with an encoder (1)
8. Install the position
indicator on the left
and rear of the fi xing
element.
9. Tighten the knurled
screw.
10. Start AMpro and
select the Diagnostic
 Encoders  Fixture
Setup window.
11. Click on the Encoder
with which the fi xing
element is centrally
aligned (uneven number).
12. Click on Accept.