Bosch Rexroth ActiveMover - Page 61

Installation 61/188
3 842 564 874/2021-04, MIT: ActiveMover, Bosch Rexroth AG
Fig. 37:
12
8 x
ISO8734
6 x 20
11
10
557 186-36
SW6
4x
13
SW6
8x
M
D
=40 Nm
==
Assembling the section module on the base frame (1)
10. Mount the section
module centrally on the
fi xing plates. Tighten the
fi xing screws only
slightly.
11. Put one cylinder pin
each between the
module holder and
the cylinder pin of the
fi xing plate.
12. Press the section
module against the
cylinder pin.
13. Tighten the fi xing
screws.