Brother MFC-9010CN - Page 562

App.1-29
Confidential
■ WSW29 (Function setting 7)
■ WSW30 (Function setting 8)
Selector No. Function Setting and Specifications
1
l
3
Compression threshold level for
voice signals inputted via the
telephone line in the built-in TAD
operation (Not used.)
4
l
6
Compression threshold level for
voice signals inputted via the handset
in the built-in TAD operation
(Not used.)
7
Impedance switching control in pulse
dialing (Not used.)
8
Prompt beep when the memory area
for the activity report becomes full
(Not used.)
Note:
Selectors 7 and 8 are applicable only to the European versions.
Selector No. Function Setting and Specifications
1
l
3
Dial tone/busy tone detection level
during recording of ICM (Not used.)
4
l
6
Not used.
7
Scanning magnification adjusting
function (Not used.)
8 Not used.