Canon iPF6400S - Page 488

9
Press ▲ or ▼ to align the paper leading edge (a) with
the leading edge (c) of the metal plate (b) on the output
tray.
Caution
• Do not touch the metal plate (b) as doing so may cause injuries.
Note
• If the Spectrophotometer Unit (optional) is mounted, align the paper leading edge with the leading edge (c) of
the metal plate while looking from the output tray of the Spectrophotometer Unit.
10 Print the job.
The printer stops advancing the paper after printing.
Note
• The printer can continue to receive print jobs from computers. If a print job is received and printed here, it can
be printed without the margin of about 23 cm being created at the paper leading edge.
11
Press the Feed button.
Roll paper is fed to the specified cut position and then automati-
cally stopped.
12
Cut the roll paper manually with scissors or the like.
Important
• Cut at the dotted line printed on the paper. If you cut on the printer side of the dotted line, the paper leading
edge may rub against the printhead and may deviate from the paper retainer.
Specifying the Cutting Method for Rolls iPF6400S
User's Guide
Handling and Use of Paper Handling rolls
488