2
Access the Main pane.
3
In the A Media Type list, select the type of paper that is loaded. In this case, click Plain Paper.
4
Make your selection in the E Print Target list.
5
Make your selection in the F Print Quality list.
6
Access the Page Setup pane.
7
Select and click a roll paper in the A Paper Source list.
8
Select the paper width of the roll loaded in the printer for B Roll Width. In this case, 16 in. (406.4mm) is
selected.
9
In C Page Size, make sure 100*500 is displayed, as registered in Page Setup.
10
Select the D Enlarged/Reduced Printing check box.
11
Click F Fit Roll Paper Width.
12
Confirm the print settings, and click M Print to start printing.
Note
• For tips on confirming print settings, see "Confirming Print Settings ." ➔ P.321
Printing on Non-Standard Paper Sizes
Printing on Non-Standard Paper Sizes
For printing on non-standard size paper, first register the paper size in the printer driver.
Once you register a paper size, you then can select it repeatedly from the paper size list. The paper size can be set
up to 18.0 m.
Printing on Non-Standard Paper Sizes
iPF6400S
User's Guide
Enhanced Printing Options Printing banners or at other non-standard sizes
100
To Next Page
Loading...
